How to Apply WOCA Exterior Oil with Oil Applicator
- Clean wood surface with WOCA Exterior Cleaner before starting the oil treatment.
- Leave the wood to dry for at least 24 hours.? Humidity should not be above 17%. Sand down any rough wood fibers with 120 grit sandpaper.
- Apply WOCA Exterior Oil in dry weather only.? Temperature should not be below 55.4°F. Avoid direct sunlight and high temperatures.
- Stir the oil thoroughly before use.
- Apply an even and thin coat of oil using an oil applicator or with a brush. Treat the end grain wood first. The wet oil may have a white shade. When the water has evaporated after a few minutes, the wood will appear oiled.
- Wipe off any excess oil with clean cotton cloths after no more than 5 minutes. Take particular care of removing excess oil from joints and grooves.
- If the surface does not appear saturated with oil, repeat steps 5 and 6.
- When the wood is dry, it may be polished with a polishing pad or polishing machine to ensure an extra hard-wearing surface.
- It takes 24 to 48 hours for the oil to harden thoroughly, depending on weather conditions and outdoor temperature.?Do not expose wood to water during this period.
WOCA Exterior Cleaner and Oil-HD from Woca Products from Woca Direct on Vimeo.